
Fanatic Aero Carve Foil Wings
Regular price £619.00The brand new Fanatic range of mid to low aspect Aero Carve Wings are designed for the ambitious rider looking for direct and playful turning responses in the waves and aggressive pop for air moves.
At first glance, you might think the Aero Carve range goes totally against the trend. There are more and more high aspect wings for pumping and improved glide out there, whilst these new Carve wings are in the mid to low aspect range. The shorter span offers a direct response to steering and follows commands very intuitively and with a forgiving nature. The control you have over these wings makes you carve harder and with more control from the first wave you pick. The wing recovers effortlessly when breaching and landings are smooth and easy, so you’ll be popping back up in flight mode right away. The curved centre with a wider chord offers aggressive pop for jumping and the reflexed horizontal tips are neutral when getting some air on hard carves.
The Aero Carve wings are best matched with our shorter fuselages for maximum turning experience.
Available Mast options:
- 60cm – special size for shallow waters
-
75cm – All-round / Entry / Freestyle
Go-to size for most Wing Foilers on lakes, great to start and very compact for progressive air moves. Prone and SUP Foilers of all levels in small surf. -
82cm – All-round / Surf / Freestyle / Downwind
"One for all" mast for Wing Foilers looking for the perfect mix of being compact for freestyle, yet having length for surfing and swell. Prone and SUP Foilers in medium surf. Freestyle Windsurf Foilers. -
90cm – Freeride / Surf / Downwind
Wing Foilers looking for the extra room for comfort in chop, surf and open ocean swell. Go-to size for Windsurf Foilers.
The Fanatic Aero Carve Foil Wings Feature:
- Modern mid to low aspect designs with fast profiles offering direct turning behaviour
- Carbon front and back wings with 30° layup for maximum performance with direct flex response and minimal weight
- New masts and fuselages with 19.5% weight reduction compared to previous AL masts/fuselage combos
- New mast profile with 14% drag reduction
- New Fuselages with highly improved trim and playfulness
- M8 & M6 Torx screws plus tools
- Wings and fuselages are fully interchangeable between Aero Carve, Aero High Aspect, Aero Lift and the Flow wings with the new mount. Opening the world for higher speeds for winging with the Flow 1000 for example
- Fuselages with an extra-large mounting area without pockets for bulletproof connections and maximum load spread – without getting stuck
- Individual tuning through supplied wedges – changes the angle of attack
- New base plate with higher walls and glued + screwed connection of mast and plate for “one-piece” connection and maximum durability
Fanatic Aero Carve Foil Wings Specifications:
Foil |
Aero Carve Range AL 3.0 |
Aero Carve Range AL 3.0 |
Aero Carve Range AL 3.0 |
Aero Carve Range AL 3.0 |
FRONT WING SIZE CM² |
750 cm² |
900 cm² |
1150 cm² |
1400 cm² |
BACK WING SIZE CM² |
216 cm² |
216 cm² |
250 cm² |
250 cm² |
FRONT WING SPAN |
63 cm |
70 cm |
78 cm |
86 cm |
FRONT WING ASPECT RATIO |
5.2 |
5.2 |
5.2 |
5.2 |
FRONT WING ASPECT RATIO |
68 cm / 78 cm (Wing / |
68 cm / 78 cm (Wing / |
68 cm / 78 cm (Wing / |
68 cm / 78 cm (Wing / |
FUSELAGE OPTIONS |
60 cm / 75 cm / 82 cm / |
60 cm / 75 cm / 82 cm / |
60 cm / 75 cm / 82 cm / |
60 cm / 75 cm / 82 cm / |
MAST OPTIONS |
TRACK FOIL MOUNT |
TRACK FOIL MOUNT |
TRACK FOIL MOUNT |
TRACK FOIL MOUNT |
FRONT WING SCREWS |
M8x25 Torx |
M8x30 Torx |
M8x30 Torx |
M8x35 Torx |
BACK WING SCREWS |
M6x20 Torx |
M6x20 Torx |
M6x20 Torx |
M6x20 Torx |